Animate plots

#1 Publicado: 6/11/2019 6:41:56

7 me gusta en 158 mensajes.

Grupo: User

Hi guys.

Seeing how fast I got great and helpful answers yesterday, I thought I might ask another rather silly question. I am trying to animate a plot, and I have never done it before.

I have made a simple sheet ploting V,M for a rectangular simply supported beam with uniformly distributed load. I have also plotted sigma and tau for the section, as well as Von Mises.

I have tried to make 3D plots to show how stresses evovle through the length of the beam, and to some extent it illustrates that.

I have also tried to animate a 2D plot, to work like a cross section that moves along the length of the beam, but I cannot figure out how to make it work.

Any ideas where it went wrong for me?

Also; is it possible to plot stresses along y-axis as opposed to x-axis?

Thanks again :d

spenninger bjelke.sm (30,46 KiB) descargado 1233 vez(es).

#2 Publicado: 6/11/2019 11:11:51

Jean Giraud

983 me gusta en 6.866 mensajes.

Grupo: User

Oh !!! too many questions in there.
Some typical animations:

0Anim Brownian.sm (9,94 KiB) descargado 1169 vez(es).
0Anim Butterfly.sm (15,42 KiB) descargado 1203 vez(es).
0Anim Analemma.sm (29,27 KiB) descargado 1212 vez(es).
0Anim Brownian 3D [Ber7].sm (24,55 KiB) descargado 968 vez(es).
0Anim CONVOLUTION.sm (27,89 KiB) descargado 1150 vez(es).
0Anim Cheval.sm (21,64 KiB) descargado 1186 vez(es).
0Anim Lorenz Attractor.sm (6,08 KiB) descargado 1262 vez(es).
0Anim Ellipse.sm (13,85 KiB) descargado 1189 vez(es).
0Anim Lorenz Attractor Norm2r.sm (10,48 KiB) descargado 1222 vez(es).
0Anim Gozilla.sm (11,57 KiB) descargado 1181 vez(es).
0Anim Model [Lissajous, Brownian, Butterfly].sm (39,48 KiB) descargado 1023 vez(es).
0Anim Trifolium [Windmill Ber7].sm (25,85 KiB) descargado 1032 vez(es).
0Anim Trifolium [Windmill].sm (17,34 KiB) descargado 982 vez(es).

#3 Publicado: 6/11/2019 12:31:32

Fridel Selitsky

520 me gusta en 451 mensajes.

Grupo: User

Check out this thread
https://en.smath.com/forum/yaf_postst1068_Beam-calculation.aspx

#4 Publicado: 6/11/2019 12:51:59

Jean Giraud

983 me gusta en 6.866 mensajes.

Grupo: User

Wrote
Also; is it possible to plot stresses along y-axis as opposed to x-axis?

1. Yes as discrete format ... augment(y,x) in reverse order.
2. surface 3D does not save settings. Plot f,g,j
not you had plot f(x,y) ...
3. can't doctor the last plot ... proved otherwise.

spenninger bjelke _1.sm (55,57 KiB) descargado 1207 vez(es).

#5 Publicado: 6/11/2019 17:45:06

hanskl

7 me gusta en 158 mensajes.

Grupo: User

Wrote
Check out this thread
https://en.smath.com/forum/yaf_postst1068_Beam-calculation.aspx

Wowzers!

#6 Publicado: 6/11/2019 17:47:42

hanskl

7 me gusta en 158 mensajes.

Grupo: User

Wrote

Wrote
Also; is it possible to plot stresses along y-axis as opposed to x-axis?

1. Yes as discrete format ... augment(y,x) in reverse order.
2. surface 3D does not save settings. Plot f,g,j
not you had plot f(x,y) ...
3. can't doctor the last plot ... proved otherwise.

spenninger bjelke _1.sm (55,57 KiB) descargado 1207 vez(es).

Thanks Jean!

I will try to plot about y-axis with the augment function.
Surface 3D not saving settings explains a lot! I think I tried to save those settings at least 10 times before giving up.

I will try to understand how plot animations work, and come back with a animated plot of my stresses..

Best regards,
Hans Kristian.

#7 Publicado: 6/11/2019 18:58:23

hanskl

7 me gusta en 158 mensajes.

Grupo: User

Well, I got the animations to work. I guess the mistake was to try to animate on a variable named 't'.

With a bit more tinkering I should be able to plot my stresses about y-y axis as well.

Best regards,
Hans Kristian

spenninger bjelke.sm (32,03 KiB) descargado 1251 vez(es).

#8 Publicado: 6/11/2019 21:25:26

Jean Giraud

983 me gusta en 6.866 mensajes.

Grupo: User

Wrote
Well, I got the animations to work

I saved it under your name [Project Hans].
Always credit what's not personal.
Jean

#9 Publicado: 7/11/2019 0:31:04

Jean Giraud

983 me gusta en 6.866 mensajes.

Grupo: User

... that one is for training your Olympic Monkey !
First: show him the Smath video ... enjoy.
Jean

0Anim Fourier MonkeyBranching.sm (14,48 KiB) descargado 1235 vez(es).

#10 Publicado: 7/11/2019 6:06:33

hanskl

7 me gusta en 158 mensajes.

Grupo: User

Wrote

Wrote
Well, I got the animations to work

I saved it under your name [Project Hans].
Always credit what's not personal.
Jean

I find it somewhat funny my simple stress visualization sheet was something you deemed worthy of saving on your harddrive.

Thanks,
Hans Kristian

#11 Publicado: 7/11/2019 18:07:53

Jean Giraud

983 me gusta en 6.866 mensajes.

Grupo: User

Wrote
I find it somewhat funny my simple stress visualization sheet was something you deemed worthy of saving on your harddrive.

It carries units so nicely, not usual vs so many projects
that fail [Units don't match].
The attach breakfast with chicken rather than eggs.
At least, my small laptop does not smoke.

Pattern Julia Set [PUBLISH].sm (25,09 KiB) descargado 995 vez(es).

#12 Publicado: 8/11/2019 7:08:47

hanskl

7 me gusta en 158 mensajes.

Grupo: User

Wrote

Wrote
I find it somewhat funny my simple stress visualization sheet was something you deemed worthy of saving on your harddrive.

It carries units so nicely, not usual vs so many projects
that fail [Units don't match].
The attach breakfast with chicken rather than eggs.
At least, my small laptop does not smoke.

Thank you!

Mine actually managed this sheet in 1.2 minutes.. :d

#13 Publicado: 8/11/2019 13:31:53

Fridel Selitsky

520 me gusta en 451 mensajes.

Grupo: User

Wrote
... that one is for training your Olympic Monkey !
First: show him the Smath video ... enjoy.
Jean

Another variation of Jean animation

0Anim Fourier MonkeyBranching 1.sm (18,08 KiB) descargado 1214 vez(es).

#14 Publicado: 8/11/2019 14:58:53

Andrey Ivashov

2.343 me gusta en 4.056 mensajes.

Grupo: Super Administrator

Wrote

Wrote
I find it somewhat funny my simple stress visualization sheet was something you deemed worthy of saving on your harddrive.

It carries units so nicely, not usual vs so many projects
that fail [Units don't match].
The attach breakfast with chicken rather than eggs.
At least, my small laptop does not smoke.

Pattern Julia Set [PUBLISH].sm (25,09 KiB) descargado 995 vez(es).

0.8 min using latest 7251:

Significant (20x) performance improvement for 3 years.

#15 Publicado: 8/11/2019 21:42:22

Jean Giraud

983 me gusta en 6.866 mensajes.

Grupo: User

Wrote
Significant (20x) performance improvement for 3 years.

Impressive improvement ... MCD 11 XP Pro [4 sec]
Thanks Andrey ... Jean

SMath

Animate plots

Animate plots - Mensajes

Foro SMath

Animate plots - Mensajes