Unit problem

#1 Pubblicato: 22/11/2011 14:42:41

oalfishcivil

0 apprezzamenti in 1 post.

Gruppo: User

a:=10 ft
b:=a^4
b= The program can't recognize ft^4.
Is there any way to do this?
Thanks

#2 Pubblicato: 22/11/2011 17:01:32

Radovan Omorjan

325 apprezzamenti e 1 disapprezzamenti in 2.052 post.

Gruppo: Moderator

Hello,

Do not understand?
[LIVE width=170 height=130]http://smath.info/live/?file=3270[/LIVE]

Just change m^4 into ft^4

Regards,
Radovan

When Sisyphus climbed to the top of a hill, they said: "Wrong boulder!"

#3 Pubblicato: 14/12/2011 19:50:05

amit28it

0 apprezzamenti in 16 post.

Gruppo: User

Wrote
a:=10 ft
b:=a^4
b= The program can't recognize ft^4.
Is there any way to do this?
Thanks

In the above explanation is cryatal clear .
So b = 10000 ft^4.

#4 Pubblicato: 14/12/2011 23:32:10

Edward Ulle

21 apprezzamenti in 182 post.

Gruppo: Moderator

Unlike MathCAD you have to type a single quote (') before typing the units.

a:=10'ft

For the second b= go to the end of the line and type ' and enter ft^4

[LIVE width=200 height=300]http://smath.info/live/?file=3372[/LIVE]

Ed

#5 Pubblicato: 15/12/2011 20:21:59

Waluyo Adi Siswanto

1 apprezzamenti in 55 post.

Gruppo: User

Using ' before typing unit is a new information for me. Thanks. Defining a unit can be faster.
Usually I just type with the unit what I want, then select from the unit selection under the cursor. For example I just type MPa then select unit MPa. Never use ' before.

#6 Pubblicato: 15/12/2011 23:29:31

Edward Ulle

21 apprezzamenti in 182 post.

Gruppo: Moderator

You can actually define units either way. With or without the need for single quote. I like the single quote to be consistent with other units and so it appears in the units style of display.

[LIVE width=400 height=300]http://smath.info/live/?file=3373[/LIVE]

Ed

SMath

Unit problem

Unit problem - Messaggi

Forum SMath

Unit problem - Messaggi