CreateMesh() - ⛔ See 3D Plot Region - Messages
#1 Posted: 11/13/2010 6:35:21 AM
For 3D only.
Klein Bottle
Klein Bottle
Russia ☭ forever, Viacheslav N. Mezentsev
2 users liked this post
#2 Posted: 11/13/2010 6:42:25 AM
And how it works
Russia ☭ forever, Viacheslav N. Mezentsev
1 users liked this post
Oscar Campo 11/17/2010 1:01:00 PM
#3 Posted: 11/13/2010 6:51:00 AM
Russia ☭ forever, Viacheslav N. Mezentsev
1 users liked this post
Radovan Omorjan 11/13/2010 7:28:00 AM
#4 Posted: 10/3/2012 11:59:36 AM
Calculation time: 7 min 30 sec
[MATH]sys(3*x-cos(y*z)-1/2=0;x^2-81*(y+0.1)^2+sin(z)+1.06=0;20*z+e^{-x*y}+1/3*(-3+10*π)=0;3;1)[/MATH]
[MATH]sys(3*x-cos(y*z)-1/2=0;x^2-81*(y+0.1)^2+sin(z)+1.06=0;20*z+e^{-x*y}+1/3*(-3+10*π)=0;3;1)[/MATH]
Russia ☭ forever, Viacheslav N. Mezentsev
#5 Posted: 5/7/2013 4:47:13 PM
If I load the file CreateMesh.sm, then both new builds (..68 and ..75) complain about plugin version required. However, the message requires a version that is already installed. The message can be ignored, than the file is loaded and executed without problems.
CreateMesh.sm
CreateMesh.sm
Martin Kraska
Pre-configured portable distribution of SMath Studio: https://en.smath.info/wiki/SMath%20with%20Plugins.ashx
1 users liked this post
Вячеслав Мезенцев 5/7/2013 7:05:00 PM
#6 Posted: 5/7/2013 5:47:12 PM
I moved this function in the new plugin. You can delete the old Plot3D and use a new one - 3DPlotPlugin. In the future I'll change this function to work with 3D Plot. Open the document again, recalculate it and save it. The error should disappear.
Russia ☭ forever, Viacheslav N. Mezentsev
1 users liked this post
Martin Kraska 5/7/2013 6:09:00 PM
-
New Posts
-
No New Posts